Company Intruduction
What Is a Current Transformer CT?
What Is a Current Transformer CT?
A current transformer ct is an instrument transformer that produces an alternating current in its secondary winding proportional to the current passing through its primary.current transformer ct It is primarily used when the actual current flowing in an electrical circuit is too high to be monitored using a standard instrument such as an ammeter. By reducing the current to a more manageable level the CT allows it to be monitored safely.
There are a variety of applications for CTs including power metering and protective relays within the electrical industry.current transformer ct Measuring and tracking electricity consumption is a crucial process for energy providers and utilities who must balance supply with demand. CTs are a vital component in this process and are available for a wide range of applications including revenue metering, power factor monitoring, watt-hour meters and protective relays.
The basic CT consists of a silicon steel core with a number of turns of copper wire wound around it.current transformer ct A conductor passing through the core is centered in the CT window and is the source of the primary current that passes into the secondary winding. Most CTs use a single turn primary winding but some have multiple turns to increase the current range or improve the accuracy.
There is a wide variety of CTs available for different uses, from revenue-grade CTs used for electric utility metering to small residential and commercial watt-hour meters.current transformer ct CTs are available with a variety of accuracies, burden powers and turns ratios, so they must be carefully selected to match the application.
Clamp-type CTs are often used to measure AC current in power distribution systems. These devices clamp around a conducting element such as a bus bar and then provide a direct measurement reading on a digital display without disconnecting the conductor. They are available for measuring currents from 100 up to 5000 amps with square windows ranging in size from 1 up to over 12''.
Other CTs are mounted on porcelain or polymer insulators and slip over the bushing of a current or voltage lead, making them easy to install in existing wiring. They may be positioned to be centered over the secondary coil of a magnetic circuit breaker (MCB) or they may be connected between the breaker and the voltage leads to prevent damage from voltage spikes.
Both types of CTs are designed to be protected against secondary side open circuits, which can cause dangerously high levels of current to flow in the system. The protection provided varies by design but in general it is accomplished through the use of a shunt resistor or a solid-state bridge rectifier. For the most reliable results, a combination of shunt and solid-state devices is often used.
Tags:current meter | current sensor
1users like this.